Laser network accessory

Secure outdoor mounting for compatible Starlink Gen 3 systems

Designed for long-term exterior installation, this wall mount kit helps position a compatible Starlink Gen 3 dish on a suitable wall or fascia with a stable fixed base and cleaner cable routing.

The raised mounting position can help reduce interference from nearby structures, while the outdoor-ready build is made for ongoing exposure in everyday conditions.

Browse Network Cables View Product FAQs

Laser Starlink Gen 3 wall mount packaging main image on white background

Available in New Zealand at Noel Leeming

This product is also available in New Zealand through Noel Leeming.

Fixed mounting point

Helps keep the dish steady once installed on a suitable structural surface.

Made for Gen 3 and V4

Designed for compatible Starlink Gen 3 (v4) systems only.

Outdoor-ready build

Metal construction with anti-rust powder coating supports ongoing exterior use.

Wall and fascia installation

Suitable for secure mounting where proper structure and clear positioning are available.

Cable pass-through support

Helps guide the cable through the mast and mount for a neater finish.

Complete kit included

Supplied with the main mount parts, install kit and user manual to support setup.

Starlink Gen 3 wall mount installed on an exterior roofline

Built for better placement flexibility

Mounting higher on a suitable exterior surface can help position the dish away from nearby rooflines, poles or other structures that may interfere with signal quality.

A fixed base keeps the setup stable, while cable routing support helps keep the installation cleaner and more contained through the mast and wall mount assembly.

This kit is intended for secure, permanent-style installation where the mounting surface is strong, level and appropriate for the application.

Laser Starlink Gen 3 wall mount shown installed with dish and cable routing

Designed for real outdoor installs

Suitable for users who need a more secure mounting point than a temporary ground placement, especially where a raised position supports a cleaner view of the sky.

Laser Starlink Gen 3 wall mount packaging front artwork

Complete kit for a more prepared setup

Includes the wall mount, cover, pipe adapter, pipe, install kit and user manual. Basic DIY installation is possible, although professional installation is recommended for the best result.

Compatibility and setup

This mount is designed for compatible Starlink Gen 3 (v4) systems and supports secure installation on suitable wall or fascia surfaces where a clear view of the sky is available.

Use the obstruction tool in the app and choose a location with a clear view of the sky.
Required tools include a drill or impact driver, 6 mm drill bit, 9/16 in hex socket, marker and level.
Installation conditions, routing, and surrounding environment can affect performance.
Extended cable lengths may reduce power delivery or signal performance in some setups.
Ensure drilled areas are sealed properly and all connections are secure before powering on.

Important: Not designed for extreme wind events. If you are not confident with the installation, contact a professional installer.

Quick questions

Is this mount compatible with all Starlink dishes?

No. It is designed for compatible Starlink Gen 3 (v4) systems only.

Does the kit include everything needed to install it?

The kit includes the mount parts, installation kit and user manual. You will still need your own drill or impact driver, 6 mm drill bit, 9/16 in hex socket, marker and level.

Important information

Compatible with Starlink Gen 3 (v4) systems only. This product is not manufactured, authorised, endorsed, or affiliated with Starlink or SpaceX. Performance may vary depending on installation method, routing, and environmental conditions. Extended cable lengths may result in reduced power delivery or signal performance in some setups. Ensure proper installation and secure connections before use.

Product Spec: Product Dimensions (cm)	35x18.5x19.5
Shipping: EAN Barcode	9335432047806
Shipping: Inner Barcode	29335432047800
Shipping: Inner Qty	6
Shipping: Outer Qty	6
Shipping: Outer Barcode	19335432047803
Product Weight (kg)	0.97
Shipping: Packaging Length (cm)	28.5
Shipping: Packaging Width (cm)	8.7
Shipping: Packaging Height (cm)	23.5
Shipping: Packaging Weight (kg)	1.28
Supported satellite dish model	Starlink Standard Dish (Gen 3 / V4)
Maximum supported dish weight	25 Kg
Material	Metal
Material type	Zinc Ally
Protective coating type	Anti-rust powder coating
Outdoor installation suitability	Yes
Compatible with original Starlink installation hardware	Yes
Compatible with original Starlink installation tools	Yes
Mounting surface types supported	Wall, Fascia, Pole, Roof structure
Number of mounting holes	2
Cable routing support	Yes
Cable pass-through feature	Yes
Required installation tools	Drill / Impact Driver, Drill Bit 6 mm (1/4 in), Hex Socket 9/16 in, Marker, Level
Installation skill level required	Basic DIY (Professional Installer Recommended)
What's in the Box	Wall Mount, Cover, Pipe Adapter, Pipe, Install Kit, User Manual

Laser Cat6 Ultra Slim Network Cable 0.5M

Laser 60W USB-C to USB-C Cable White 0.5M

Laser Ultra Slim Cat6 Cable 0.5M Yellow

Laser Fast Charging Dual USB Charger White

Laser Fast Charging Dual USB Charger Black

Laser 10W RGB Downlight with Voice Control

Laser Cat6 Ultra Slim Network Cable 1M

Laser 400ml Compressed Air Duster Spray for Electronics

Laser Cat6 Ethernet Cable 2M Blue

Laser Disposable 3 Ply Face Mask Blue 20 Pack

ChargeCore Starlink Gen 3 V4 Wall Mount