Laser ChargeCore Connectivity

46m outdoor-ready Ethernet cable for Starlink Gen3 V4 setups

Designed for longer installation runs, this Ethernet cable carries both power and data between compatible Starlink Gen3 V4 equipment, helping you place your dish where the signal is strongest while keeping your router in a practical indoor location.

With weather-sealed RJ45 connectors, Cat5e performance, PoE support and a long 46m length, it is built for more flexible roofline, eave and exterior wall routing.

Browse Cables Visit Support

Laser 46m Ethernet cable for Starlink Gen3 main product view

Key benefits

46m installation flexibility

Helps extend the distance between the dish and router for stronger placement options around the home, property or workspace.

Power and data in one cable

PoE support allows compatible setups to carry both network data and power through the same cable connection.

Outdoor-ready connection

Weather-sealed connectors help resist dust and moisture during exposed routing and practical outdoor installation.

Stable wired performance

Cat5e support, copper conductors and 1000Mbps data transfer capability help maintain a dependable wired connection.

NZ Exclusive - Available at Noel Leeming

New Zealand customers can find this Laser ChargeCore Ethernet cable exclusively through Noel Leeming.

Designed for compatible Starlink Gen3 V4 setups, it provides a practical longer-length cable option for outdoor routing and flexible dish placement.

NZ exclusive available at Noel Leeming badge

Laser Ethernet cable used in Starlink Gen3 outdoor setup

Built for better dish placement

Starlink performance can depend on where the dish is positioned. A longer cable gives installers and home users more freedom to route around rooflines, eaves, wall edges and other practical mounting areas.

The 46m length is useful when the best dish location is not close to the router location. It helps reduce compromise between signal position and where the router needs to sit inside the property.

Important compatibility note: This cable is designed for compatible Starlink Gen3 V4 systems. It is not manufactured, authorised, endorsed, or affiliated with Starlink or SpaceX. Performance may vary depending on installation method, routing and environmental conditions.

Designed for outdoor routing and reliable connection

Close view of weather-sealed Ethernet connector for Starlink Gen3 cable

Weather-sealed ends

Sealed connector design helps protect the connection point from dust and moisture when installed correctly.

Laser 46m Ethernet cable routed for outdoor Starlink Gen3 use

Flexible placement

The extended cable length supports more practical routing between outdoor dish placement and the router location.

Laser Ethernet cable connector detail for Starlink Gen3 V4 systems

Secure RJ45 connection

The RJ45 8P8C connector standard supports a secure wired connection for compatible systems.

Compatibility and setup

Use this cable only with compatible Starlink Gen3 V4 systems. For best results, avoid sharp bends, keep connections secure and route the cable where it is protected from unnecessary strain, pinching or repeated movement.

Extended cable lengths may result in reduced power delivery or signal performance in some setups. Installation conditions, cable routing and environmental exposure can affect results.

Quick questions

Is this cable made for Starlink Gen3 V4 systems?

Yes. This cable is designed for compatible Starlink Gen3 V4 systems. It is not manufactured, authorised, endorsed, or affiliated with Starlink or SpaceX.

Can it be used outdoors?

Yes. It is outdoor-ready with weather-sealed connectors and an IP67 water resistance rating when installed correctly. Avoid sharp bends and exposed strain points during installation.

Product Spec: Product Dimensions (cm)	4600x1.9x1.9
Shipping: EAN Barcode	9335432047790
Shipping: Inner Barcode	29335432047794
Shipping: Inner Qty	6
Shipping: Outer Qty	N/A
Shipping: Outer Barcode	19335432047797
Product Weight (kg)	1.63
Shipping: Packaging Length (cm)	24.7
Shipping: Packaging Width (cm)	7
Shipping: Packaging Height (cm)	24.5
Shipping: Packaging Weight (kg)	1.9
Compatible Starlink System Models	Gen3, Mini
Primary Function	Ethernet, power
Cable Length	46m
Cable Diameter	6.2mm
Cable Material (outer jacket)	PCV
Cable Colour	Gray
Minimum Bend Radius	5cm
Weatherproof sealing gasket	Yes
Connector Standard	RJ45 (8P8C)
Connector Durability (plug/unplug cycles)	750
Maximum Data Transfer Speed	1000Mbps
Supported Bandwidth	100MHz
Cable Category Rating (e.g., Cat5e, Cat6, etc)	Cat5e
Wire Gauge (AWG)	26AWG
Conductor Material	Copper
Maximum Voltage Rating	100W
Maximum Current Rating	4A
Power over Ethernet (PoE) Support	75-100W
Maximum PoE Power Supported	100W
Water Resistance Rating	IP67
UV Resistance	Ordinary
Operating Temperature Range	-20℃-50℃
Humidity Tolerance	≤60%–70% RH
Cable Lifespan Expectation	3-5years

Laser Cat6 Ultra Slim Network Cable 0.5M

Laser 60W USB-C to USB-C Cable White 0.5M

Laser Ultra Slim Cat6 Cable 0.5M Yellow

Laser Fast Charging Dual USB Charger White

Laser Fast Charging Dual USB Charger Black

Laser 10W RGB Downlight with Voice Control

Laser Cat6 Ultra Slim Network Cable 1M

Laser 400ml Compressed Air Duster Spray for Electronics

Laser Cat6 Ethernet Cable 2M Blue

Laser Disposable 3 Ply Face Mask Blue 20 Pack

ChargeCore Starlink Gen3 v4 Ethernet Cable 46m