Smart Deadbolt Lock with Palm Vein Recognition

Unlock a compatible door with a simple palm scan, with PIN, smart card, app and key access available when needed.

The Laser Smart Deadbolt Lock with Palm Vein Recognition combines contact-free palm access with a keypad and smart controls. Use the Connect SmartHome app to manage access and view entry records, while the included mechanical keys provide a separate unlocking option.

Key features and benefits

• Palm recognition: Unlock using a registered palm held 5 to 15cm from the sensor. The lock can store up to 50 palm scan records.
• Multiple unlocking methods: Choose palm recognition, a registered PIN, smart card or compatible NFC device, Connect SmartHome app control, or a mechanical key.
• Manage access in the app: Use the Connect SmartHome app to manage members, view unlocking records and create temporary PIN codes.
• Adjustable locking: Enable automatic locking and set a delay from 5 to 900 seconds, or use the documented permanent unlock mode when needed.
• Rechargeable battery: An included 7,800mAh lithium-ion battery powers the lock. A separate exterior USB-C port accepts temporary 5V power if the battery becomes flat.

Smart access without relying on one method

Register up to 50 PIN codes and 50 NFC smart card records alongside palm scans. Two smart cards and two mechanical keys are included. An NFC-enabled smartphone may also work, but compatibility varies by phone model and is not guaranteed.

Compatibility and setup

Door fit: Designed for compatible single-cylinder Australian doors with a thickness of 35 to 55mm and a 60mm or 70mm backset. Check for a 38mm or 54mm cross bore, a 25mm latch hole and the installation template's spacing requirements before purchase. The device controls the deadbolt; a separate door handle is recommended and is not included.

App and connection: Pair with the Connect SmartHome app using Bluetooth and a 2.4GHz Wi-Fi network. A 5GHz-only Wi-Fi network cannot be used for setup. The app supports lock control, member management, access logs and temporary PIN codes.

Important first-use step: Before configuration, the lock may open with any PIN, palm scan or smart card. Set an administrator PIN and register authorised access credentials immediately after installation. Unregistered credentials are no longer accepted once setup is complete.

Charging and backup power: Charge the removable battery using its own USB-C charging port and a suitable 5V/2A power source. Allow about six hours for the first full charge. The USB-C port on the exterior assembly supplies temporary power only and cannot charge the battery. Keep the included mechanical keys separately and accessible.

Installation conditions: Install in a sheltered location away from direct rain, moisture, high humidity and sunlight. The original product manual warns that exposure to these conditions may cause damage. Consider professional installation if unsure about door suitability.

In the box: Exterior assembly, interior assembly, latch, strike box, strike plate, rechargeable battery, two smart cards, two mechanical keys, mounting hardware, 38mm spacer, installation card, installation template, function card and user manual.

Quick FAQs

For installation help and troubleshooting, visit Laser Support and search for the model SKU.