Laser outdoor mounting accessory

Secure, adjustable mounting for Starlink Gen 3 systems

The Laser ChargeCore Pivot Mount is designed to help position a compatible Starlink Gen 3 / V4 dish on sloped roof and outdoor mounting surfaces with stable support and precise angle adjustment.

With up to 90 degree pivot adjustment, cable routing support and a fixed mounting base, it helps create a cleaner, more secure installation for homes, sheds, rooflines and suitable outdoor structures.

Explore network accessories Product support

Laser pivot mount installed on roof for Starlink Gen 3

90 degree pivot adjustment

Fine-tune the dish angle to support clearer positioning on sloped roof installations.

Designed for Gen 3 / V4

Made for compatible Starlink Standard Dish Gen 3 / V4 systems only.

Secure outdoor mounting

A fixed base helps keep the mount stable once properly installed on a suitable surface.

Cable routing support

Integrated cable pass-through helps guide the cable more neatly through the mast.

Outdoor-ready construction

Metal construction with zinc alloy material and anti-rust powder coating supports outdoor use.

Installation kit included

Supplied with key mounting hardware and a user manual to support setup.

Laser pivot mount kit packaging for Starlink Gen 3

Complete mount kit for a cleaner installation

The kit includes the pivot mount, pipe adapter, mast, installation hardware, cable routing clips and user manual. It is designed to support a secure outdoor setup where a compatible dish needs to be raised, angled and fixed into position.

The pivot design helps with alignment on pitched surfaces, while the cable routing support helps keep the installation neater once the dish is connected.

Installation note: If you are not comfortable drilling, sealing or working at height, use a professional installer. Always follow local safety requirements and the installation manual before connecting equipment to power.

Install with confidence

Plan the mounting position carefully, secure the base correctly and align the dish for a clear, open view of the sky.

Choose a clear location

Select a mounting spot with open sky visibility and fewer obstructions such as rooflines, branches, poles or nearby structures.

Fix to a solid structure

Secure the mount to a stable surface, with fixing points aligned to a suitable structural beam where required.

Route the cable neatly

Use the cable pass-through design to guide the cable through the mast for a cleaner and more practical installation.

Align and lock

Once the dish is positioned correctly, tighten the locking points to help keep the mount stable during everyday use.

Compatibility and setup

Compatible with Starlink Standard Dish Gen 3 / V4 systems only. Supported mounting surfaces include wall, fascia, pole and roof structure where the surface is stable, secure and suitable for the installation method. Tools required include a drill or impact driver, 6 mm drill bit, 9/16 in hex socket, marker and level.

Important compatibility disclaimer

Compatible with Starlink Gen 3 (v4) systems only. This product is not manufactured, authorised, endorsed, or affiliated with Starlink or SpaceX. Performance may vary depending on installation method, routing, and environmental conditions. Extended cable lengths may result in reduced power delivery or signal performance in some setups. Ensure proper installation and secure connections before use.

Helpful setup questions

Is this mount compatible with every Starlink dish?

No. This mount is designed for Starlink Standard Dish Gen 3 / V4 systems only. It is not intended for other dish generations or models.

Can I install this myself?

The installation is suitable for basic DIY users with the right tools, but professional installation is recommended if you are unsure about drilling, sealing, roof access or structural fixing.

What should I check before choosing a mounting spot?

Choose a secure structural fixing point with a clear view of the sky. Avoid areas blocked by branches, poles, roof sections or nearby obstructions.

available at Noel Leeming exclusive retailer badge

Also available at Noel Leeming. Availability may vary by location and retail range.

Product Spec: Product Dimensions (cm)	36.5x18.6x14.8
Shipping: EAN Barcode	9335432047813
Shipping: Inner Barcode	29335432047817
Shipping: Inner Qty	6
Shipping: Outer Qty	6
Shipping: Outer Barcode	19335432047810
Product Weight (kg)	1.36
Shipping: Packaging Length (cm)	29.5
Shipping: Packaging Width (cm)	9
Shipping: Packaging Height (cm)	23.5
Shipping: Packaging Weight (kg)	1.6
What's in the Box	Pivot Mount, Pipe Adapter, Mast, Installation Kit (Lag Screws ×2, External Hexagon Screw ×2, Cable Routing Clips ×20, Allen Wrenchx1), User manual
Supported satellite dish model:	Starlink Standard Dish (Gen 3 / V4)
Maximum supported dish weight:	25kg
Material:	Metal
Material type:	Zinc alloy
Protective coating type:	Anti-rust powder coating
Colour:	Grey
Outdoor installation suitability:	Yes
Mounting surface types supported:	Wall, Fascia, Pole, Roof Structure
Cable routing support:	Yes
Cable pass-through feature:	Yes
Number of mounting holes:	2
Installation skill level required:	Basic DIY (Professional Installer Recommended)
Required installation tools:	Drill / Impact Driver Drill Bit 6 mm (1/4 in) Hex Socket 9/16 in Marker Level

Laser Cat6 Ultra Slim Network Cable 0.5M

Laser 60W USB-C to USB-C Cable White 0.5M

Laser Ultra Slim Cat6 Cable 0.5M Yellow

Laser Fast Charging Dual USB Charger White

Laser Fast Charging Dual USB Charger Black

Laser 10W RGB Downlight with Voice Control

Laser Cat6 Ultra Slim Network Cable 1M

Laser 400ml Compressed Air Duster Spray for Electronics

Laser Cat6 Ethernet Cable 2M Blue

Laser Disposable 3 Ply Face Mask Blue 20 Pack

Chargecore Starlink Gen 3 V4 Adjustable Pivot Mount

Secure, adjustable mounting for Starlink Gen 3 systems